Pettit 1870 Running Gear Guardian. This product is designed to prevent fouling on all underwater metal running gear such as Propellers, Trim Tabs, Propeller Shafts and Rudder, Prop Struts, Sail drives, strainers, Bow and stern thrusters and other underwater metal or running gear by providing incredibly effective and long-lasting protection. Even low levels of fouling on running surfaces can cause efficiency losses up to 20%. Keep your vessel performing at its best with Running Gear Guardian

Specifications: Primer
Vehicle type: Modified epoxy
Finish: Flat
Curing mechanism: Solvent release
Solids by weight: 55%
Coverage: 65 ft 2
VOC: 487 grams/liter Liquid Quart
Application method: Brush, roller or spray
Number of coats: 1
Dry film thickness per coat: 2 mils
Application temperature: 50? F min / 90 F max
Thinner / Cleanup: 120 Brushing thinner
Dry time: Minimum time in hours
90 F - 1/2 to recoat (if desired) and topcoat
70 F - 1 to recoat (if desired) and topcoat
50 F - 2 to recoat (if desired) and topcoat
Anti-Fouling Topcoat

Finish: Flat
Solids by weight: 71 +- 2%
Coverage: 130 ft 2/qt.
VOC: 330 grams/liter (max)
Biocide: Cuprous Thiocyanate25%, Zinc Pyrithione2.5%
Flash point: 98 F (SETA)
Application method: Brush, roller, airless or conventional spray
Maximum roller thickness: 3/16"
Number of coats: 2
Wet film thickness: 3.6 mils
Dry film thickness: 2 mils
Application temperature: 50 F min / 90 F max
Thinner: 120 Brushing thinner
Dry time: Minimum time in hours
90 F - 1/4 to touch, 1 to recoat and 4 to launch
70 F - 1/2 to touch, 2 to recoat and 8 to launch
50 F - 1 to touch, 6 to recoat and 2 4 to launch