Pettit Antifouling Paint for Inflatable Boats is a waterbased antifouling bottom coating designed to give protection against algae, barnacles and all types of marine and fresh water fouling. It?s waterbased formula results in an effective product that is easy to apply, environmentally responsive (exceeds even the most stringent air pollution regulations) and is safer to use. It withstands frequent trailering, beaching and launching while offering excellent antifouling protection and resistance to cracking, peeling and flaking.

Type: Ablative
Active Ingredient: 25.25% Cuprous oxide
Finish: Flat
Color: 1841 Black
Curing Mechanism: Solvent release
Coverage: 430 sq. ft./gal
VOC: 150 g/l max. (1.25 lbs/gal)
Flashpoint: None
Application Data:
Methods: Brush, roller, airless or conventional spray
Number of Coats: 2 minimum with additional coat at waterline recommended
Dry Film Thickness per Coat: 1.5 mils
Wet Film Thickness per Coat: 3.75 mils
Temperature Range: 50 F. Min. / 90 F. Max
Do not apply if temperature will fall below 50 F within 6 hours of application
Humidity Range: 0% Min. / 85% Max
Dry Times (Hours)
To Touch, To Recoat, To Launch
@ 90 F.: 1/4, 1, 12
@ 70 F.: 1/2, 2, 16
@ 50 F.: 1, 4, 48
There is no maximum drying time before launching
THINNER: 140 Water Based Brushing Thinner