Pettit Hydrocoat offers exceptional multi-season protection against all types of fouling. Hydrocoat's innovative technology replaces the harsh solvents found in most bottom paints with water, resulting in an easier application and clean up, with no heavy solvent smell. Hydrocoat's ablative surface wears away with use, exposing fresh biocides while eliminating paint build up and the need for sanding. The low-odor formula is so environmentally friendly, it exceeds even the most stringent air pollution regulations. Hydrocoat withstands frequent trailering, beaching, and launching. Its unique formula allows for an unlimited dry time to launch, so you can paint in the fall or winter.

Finish: Flat
Solids by weight: 73%
Coverage: 490 sq. ft. /gal.
VOC: 150 grams/liter (max)
Biocide: Cuprous oxide: 40.43%
Flash Point: >200 F
Application method: Brush, roller, airless or conventional spray
Maximum roller Thickness: 3/16"
Number of coats: 1 minimum per season with additional coats at waterline
Wet film thickness: 3.75 mils
Dry film thickness: 1.5 mils
Application Temp: 50 F. min. / 90 F. max.
Minimum dry times (hours):
Degrees = Hours to touch / Hours to recoat / Hours to launch
90 F = 1/4 hour / 1-1/2 hours / 6 hours
70 F = 1/2 hour / 3 hours / 10 hours
50 F = 1 hour / 6 hours / 16 hours
Thinner: 140 Water-Based Brushing Liquid or clean fresh water