Interlux Mircon CSC Antifouling Paint. Uses Micron Technology to provide long-lasting multi-season protection against all kinds of fouling threats, in all conditions. Wears away (polishes) at a controlled rate, resulting in a reduced buildup of old coatings and minimized sanding at reapplication. This allows the boat to be hauled and launched without recoating. Uses less copper, more efficiently, than old fashioned high copper bottom paints. Can be applied by spray, brush or roller. Suitable for power boats and sailboats. Sold by the quart or gallon.

Specifications:
Aluminum Safe
Not Aluminum Safe
Anti-Slime Additive
None
Biocide
Cuprous Oxide
Capacity
1 Gallon
Color
Black
Copper Free
Not Copper Free
Coverage
440 Square Feet/Gallon
Cure Time
To Overcoat: 16 Hours; To Launch: 16 Hours
Type
Copolymer Ablative

Physical Data:
Vehicle type: Copolymer ablative
Finish: Matte
Components: 1
Curing mechanism: Solvent release
Solids by Volume: (Theoretical): 58%
Coverage: 440sq.ft./gal.
VOC: 370 grams/liter (as supplied)
Active ingredients: 37.2% Cuprous oxide


Application:
Application Method: Brush, roller, airless, or conventional spray
Number of coats recommended: 2-3 Minimum per season with additional coats for extended service. Bare wood: 3 coats (first thinned)
Wet Film Thickness: 3.4 mils/coat
Dry Film Thickness: 2 mils/coat
Applicator: High-quality short nap roller (maximum 3/16" nap)
Application temperature: Min. /Max. Range: 10?C/50?F and maximum 35?C/95?F. Thinner: 216, Model 117598 or 433, Model 203679