ANCHOR HATCHES Gasket Material, rubber, triangular, self-adhesive, sold by the foot. Thickness 7/16". For use with anchor hatches. FACTORY INSTALLATION INSTRUCTIONS: REMOVE ALL OLD GASKET MATERIAL, BUT DO NOT DAMAGE THE ALUM. SURFACE WHEN DOING SO. CLEAN THE SURFACE WITH ALCOHOL. WARM THE SURFACE WITH A TORCH. DO NOT OVERHEAT THE SURFACE, ONLY WANTS TO BE WARM TO THE TOUCH. 80 TO 90 DEGREES IS RECOMMENDED. THE GASKET RUBBER ALSO MUST BE THE SAME TEMP. PEEL OFF THE PROTECTIVE STRIP FROM THE GASKET MATERIAL AND APPLY WHILE THE SURFACE IS STILL WARM. APPLY PRESSURE AS INSTALLING MATERIAL TO MAKE SURE OF GOOD CONTACT. SEAL ANY SEAMS WITH LOCTITE # HDW-565 TO WELD THE SEAM. CLOSE THE HATCH COVER AND LET SIT FOR ONE HOUR TO ASSURE GASKET HAS SETTED. THE FACTORY DOES NOT RECOMMEND ANY OTHER
ADHESIVE.